Low frequency equalization
Separate L&R low frequency controls. Tape monitor switch for use with receiver. Input attenuator.
Top view (from left to right) Upper level: Left Output level – Right Output level. Mid level: Input Attenuator (0dB/-4dB/-12dB). Low level:Tape Monitor (Out/In)
Equalizzazione basse frequenze
Controlli canale sinistro e destro separati. Selettore tape monitor per l’utilizzo con un ricevitore. Attenuatore ingressi.
Vista dall’alto (da sinistra a destra) Livello superiore: Regolatore uscita sinistra – regolatore uscita destra. Medio livello: Attenuatore segnale ingresso (0 db/-4 dB/-12 dB). Livello inferiore: Tape Monitor (Out/In)
SPECIFICATIONS
Response: 20Hz to 20,000Hz +/- 0.5dB
Distortion: will not exceed 0.1% at rated output from 20Hz to 20kHz
Hum and noise: -80dB below rated output
Input sensitivity: 2.5V
Input impedance: 60k ohms
Input attenuator switch: 0dB, -6dB and -12dB
Output: 2.5V into 47k ohms or more
Equalization: 0 to +17dB at 20Hz in 5 steps (0, +6, +9, +13 and +17dB) in positions 1, 2, 3, 4, and 5 respectively.
Finish: Black and chrome
Available on request the Service Manual